Siemens Washing machine Manual de instrucciones e instrucciones de instalación - Página 23

Malfunctions of the washing machine are indicated on the display panel.

Flashing

indicator

Cause / Remedial action

No water flows in. Open tap and press the "Start/Pause" button again.

This malfunction may be caused by an improper water supply hose

connection (see chapter "CONNECTIONS: Water-inlet hose").

Pump filter blocked. Clean the pump filter (see chapter "CLEANING THE

FILTER") and restart the program with the "Start/Pause" button.

Check drain hose: The connection must not be blocked (see chapter

"CONNECTIONS: Water drainage").

Drain hose condition: The connection must not be blocked (see chapter

"CONNECTIONS: Water drainage").

Drum blocked. Check if a small laundry item (e.g. handkerchief, sock...)

has got between the detergent dispenser and drum. For access to the

bottom of the dispenser, refer to the chapter "CLEANING THE FILTER"

Lid improperly closed. Check if the lid is closed. Start the programme

using the "Start/Pause" button.