Siemens WM..T SERIES Manual de instrucciones e instrucciones de instalación - Página 28

Navegue en línea o descargue pdf Manual de instrucciones e instrucciones de instalación para Lavadora Siemens WM..T SERIES. Siemens WM..T SERIES 40 páginas.

Imprimir página

Sensors

en
Removing laundry/switching
off the appliance
Open the door and remove the
1.
laundry.
Turn the program selector to off
2.
position. The appliance is switched
off.
Turn off the tap.
3.
Not required for Aqua-Stop
Note:
models.
Notes
Always wait until the program ends,
■
as the appliance could still be
locked.
If the display panel goes off at the
■
end of a program, the energy-saving
mode is active. Press any button to
activate the panel.
Do not leave any items of laundry in
■
the drum.They may shrink in the next
wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal dry.
■
Leave the door and detergent
■
drawer open so that any residual
water can evaporate.
28
H
Sensors
A utomatic load sensing
S e n s o r s
The automatic load-sensing function
perfectly adapts the water consumption
to each programme depending on the
type of fabric and the load.

Unbalanced load detection

system

The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping the drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Place large and small items of
Note:
laundry evenly in the drum.
~ "Faults and what to do about them"
on page 33