Cisco 7941G - Unified IP Phone VoIP Manual del teléfono - Página 7

Navegue en línea o descargue pdf Manual del teléfono para Teléfono IP Cisco 7941G - Unified IP Phone VoIP. Cisco 7941G - Unified IP Phone VoIP 30 páginas. Unified communications manager 9.0 (sccp and sip)
También para Cisco 7941G - Unified IP Phone VoIP: Manual del usuario (21 páginas), Manual del usuario (25 páginas), Ficha de datos (7 páginas), Referencia rápida (2 páginas), Manual del usuario (4 páginas), Manual del usuario (4 páginas), Manual del usuario (13 páginas), Manual de administración (12 páginas), Manual del usuario (13 páginas), Manual del usuario (13 páginas), Manual del usuario (6 páginas), Manual de administración (16 páginas), Solución de problemas y mantenimiento (27 páginas)

Safety and Performance Information

Read the following safety notices before installing or using your Cisco Unified IP Phone:

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you

work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with

standard practices for preventing accidents.

Warning: Read the installation instructions before you connect the system to its power source.

Warning: Ultimate disposal of this product should be handled according to all national laws and

regulations.

Warning: Do not work on the system or connect or disconnect cables during periods of

lightning activity.

Warning: To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to

telephone network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain

TNV circuits. Some LAN and WAN ports use RJ-45 connectors. Use caution when connecting cables.

Caution: Inline power circuits provide current through the communication cable. Use the Cisco

provided cable or a minimum 24 AWG communication cable.

Power Outage

Your accessibility to emergency service through the phone is dependent on the phone being powered.

If there is an interruption in the power supply, Service and Emergency Calling Service dialing will not

function until power is restored. In the case of a power failure or disruption, you may need to reset or

reconfigure equipment before using the Service or Emergency Calling Service dialing.