Epson BrightLink 480i Manual de instrucciones - Página 34

Navegue en línea o descargue pdf Manual de instrucciones para Proyector Epson BrightLink 480i. Epson BrightLink 480i 47 páginas. Lamp and status information
También para Epson BrightLink 480i: Manual Start Here (6 páginas), Manual de conexión (6 páginas), Manual de instalación (5 páginas), Plantilla de montaje (5 páginas), Especificaciones (6 páginas), Declaración de conformidad (4 páginas), Manual de instalación (3 páginas), Manual de instalación (2 páginas), Manual de instalación (5 páginas), Manual Start Here (6 páginas)

Imprimir página
Epson BrightLink 480i Manual de instrucciones
Using the control functions
The following table shows the meanings of the control buttons.
Power On
Turns the projector power on.
Power Off
Turns the projector power off.
Switch source
Switches the video input source to the
Computer1
Computer1 port or Computer port.
Switch source
Switches the video input source to the
Computer 2
Computer2 port.
Switch source
Switches the video input source to the BNC
BNC
port.
Switch source
Switches the video input source to the
S-Video
S-Video port.
Switch source
Switches the video input source to the Video
Video (RCA)
port or video2 port.
Switch source
Switches the video input source to the Video1
Video (BNC)
port.
Switch source SDI Switches the video input source to the SDI
port.
Switch source
Switches the video input source to the
DisplayPort
DisplayPort port.
Switch source
Switches the video input source to the DVI-D1
DVI-D, HDMI 1
port or HDMI1 port.
If the projector is equipped with either a
DVI-D port or HDMI port (but not both), use
this button to select the input signal.
If the projector is equipped with both DVI-D
port and HDMI port, use this button to select
DVI-D as an input source.
Switch source
Switches the video input source to the DVI-D2
DVI-D, HDMI 2
port or HDMI2 port.
If the projector is equipped with both DVI-D
port and HDMI port, use this button to select
HDMI as an input source.
Switch source
Switches the video input source to the D4
D-Video
port.
Switch source
Switches the input source to EasyMP or
EasyMP
EasyMP.net.
Switch source
Switches the input source to USB Display.
*
USB Display
Switch source
Switches the video input source to the
*
USB1
external equipment connected via a USB
(Type A) port or USB1.
Switch source
Switches the video input source to the
*
USB2
external equipment connected via a USB2
port.
Switch source
Switches the video input source to the image
*
LAN
projected by the computer via a network.
*
If the button does not function, you can switch the input source using the
button.
• Some connected projectors may not be equipped with all of the above ports
q
or functions. If you click a button for a port or function that is not
available, nothing will happen.
34