Siemens EC9A5SB90A Instrucciones de uso - Página 5

Navegue en línea o descargue pdf Instrucciones de uso para Placa Siemens EC9A5SB90A. Siemens EC9A5SB90A 20 páginas. 90 cm gas cooktop
También para Siemens EC9A5SB90A: Instrucciones de uso (20 páginas)

Imprimir página

5Installation and connection

S tatutory requirements

I n s t a l l a t i o n a n d c o n n e c t i o n

This installation must conform with the following:

Manufacturer's Installation instructions

■

Local Gas Fitting Regulations

■

Municipal Building Codes

■

Refer to AS/NZS 5601.1 for Gas Installations

■

S.A.A. Wiring Code

■

Local Electrical Regulations

■

Any other statutory regulations

■

Installation and connection

Preparing to install

Refer to AS/NZS 5601.1 for piping size details. These

built-in cooktops are intended to be inserted in a

benchtop cutout.

Do not stick the cooktop onto the worktop with silicone.

Only an officially authorised technician should connect

the appliance.

Before you begin, turn off the gas and electricity supply.

Before connecting the unit, check whether the local

connection conditions (type of gas) are compatible with

the unit's setting. Observe any special conditions

imposed by local suppliers (utilities). The specifications

of this cooktop are stated on the data label located on

the bottom of the cooktop base.

A duplicate data label is supplied for adhesion to an

accessible location near the hotplate if the data label on

the base of the hotplate cannot be accessed when the

hotplate is installed.