Cisco 7945 Series Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 7945 Series. Cisco 7945 Series 6 páginas. Ip phone and voice mail
También para Cisco 7945 Series: Manual del usuario (6 páginas), Manual del usuario (4 páginas), Manual del usuario (8 páginas), Manual de consulta rápida (6 páginas), Manual rápido del usuario (2 páginas), Manual del usuario (3 páginas), Manual del usuario (2 páginas), Manual de consulta rápida (8 páginas), Manual de formación de usuarios (2 páginas), Manual de inicio rápido (4 páginas), Manual de inicio rápido (30 páginas), Manual de consulta rápida (7 páginas), Referencia rápida (5 páginas), Manual de instalación (1 páginas), Manual de consulta rápida (3 páginas), Manual del usuario (2 páginas), Referencia rápida (2 páginas), Manual del usuario (2 páginas), Manual de consulta rápida (2 páginas), Manual de consulta rápida (2 páginas), Instrucciones (3 páginas), Manual de inicio rápido (2 páginas), Manual (5 páginas), Primeros pasos (2 páginas)

Imprimir página
Cisco 7945 Series Manual del usuario
ACCESSING ONLINE HELP
1.
Press the
button, then press any softkey feature or button on the phone to display help information for that softkey
feature or button. Or, pause for the help menu.
USING THE LCD ICONS
1.
The icons on the screen change depending on the task you are performing.
HANDSET, SPEAKERPHONE AND HEADSET VOLUME
1.
To increase or decrease the volume of your handset, speaker or headset during a call or after invoking dial tone, press the up
or down
(handset, speaker or headset).
2.
To save the setting, press [Save] softkey.
ADJUSTING THE RINGER VOLUME
1.
Press the up or down Volume button
buttons are off. Press the Volume (- or +) button repeatedly until you reach the desired volume level. The new ringer
volume is saved automatically.
CHANGING THE RINGER SOUND
1.
Press the Settings
2.
Navigate to a phone line or default setting, and press [Select].
3.
Use the Navigation button to scroll through the ring types; you can press the [Play] softkey to play a sample of a
"highlighted" ring type.
4.
When you find a ring type (sound) that you like, press [Select].
5.
Press [Cancel] to revert to the previously saved setting, or press [Save].
6.
Press [Default] to apply the default ring setting to a selected phone line.
7.
Press [Exit] softkey to return to the main phone screen
(Exit softkey may have to be pressed several times to return to the regular phone screen).
CHANGING THE BRIGHTNESS
1.
Press the Settings
2.
If unable to read phone screen, press [Settings] button and then 1,4 on the keypad.
3.
Press the Up or Down softkey or the volume button
4.
Press the [Save] softkey, or press [Cancel] to revert to the previously saved setting.
5.
Press the [Exit] softkey to return to the main phone screen.
(Exit softkey may have to be pressed several times to return to the regular phone screen).
PLACING A PHONE CALL
1.
Pre-dial (dial on-hook, without first getting dial tone). Do one of the following:
a. Enter a phone number. (The Auto-Dial feature might pop up to suggest matching phone numbers from your Placed Calls
Log.)
b. Press the Navigation
Next, press Dial softkey to dial the selected telephone number. Or,
1. Lift the handset to dial the selected telephone number. Or,
2. Press Speaker button or headset button (non-wireless headsets), to dial the selected telephone number. Or,
3. Press a line button (automatically selects speaker) and dials the selected telephone number.
2.
To place a call using the speaker, press Speaker button or [NewCall] softkey and dial the number.
3.
To place a call using a headset, plug the approved headset (non-wireless headsets) into the back of the phone base and press
headset button before or after dialing number. If headset button is lit, press [NewCall] to place a call. Press [EndCall] when
finished with call to remain in headset mode.
4.
Originating a second call after you have an existing call on the same line. To do so, simply place the current call on [Hold]
(using the soft key) and press [NewCall].
5.
Receiving a second call after you have an existing call on the same line:
a. The second call will cause your line to ring once and the softkeys will change giving you an option to [Answer] or
[Divert] the call. If you press [Answer], the first call will be placed on hold automatically.
b. To switch between calls, press [Hold], then select the line you want, and press [Resume] for the line you want to talk with.
(
Volume) button. The Volume button adjusts the volume for the currently active condition
button and select, User Preferences, then select [Rings].
button and select [User Preferences], then select [Brightness].
button to scroll and/or select a phone number from your Placed Calls log.
while the handset is in the cradle and the headset and speakerphone
to set the desired level.
Pg. 3