Siemens EF6 BNN Series Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Placa Siemens EF6 BNN Series. Siemens EF6 BNN Series 12 páginas.
Imprimir página
9 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
9.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
Selection
play
Automatic childproof lock
– Switched off
– Switched on
– Manual and automatic childproof lock are
switched off.
Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
1
hotplate.
Resetting to the factory settings
– Switched off.
– Switched on.
1
Factory setting
9.2 Changing basic settings
Requirement: The hob is switched off.
Switch on the front left hotplate at heat setting 1.
1.
10 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
10.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, the online shop or a
retailer.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Never use unsuitable cleaning products.
▶
Unsuitable cleaning products
¡ Undiluted detergent
¡ Detergent intended for dishwashers
¡ Abrasive cleaners
¡ Aggressive cleaning products such as oven spray
or stain remover
¡ Abrasive sponges
1
1
Within the next 10 seconds press and hold
2.
approx. 4 seconds.
and flash alternately on the lower display.
a
lights up on the upper display.
a
Repeatedly touch
3.
pears on the lower display.
Repeatedly touch
4.
pears on the upper display.
Press and hold
for 4 seconds.
5.
a The setting is activated.
Tip: To exit the basic settings, switch off the hob using
. Switch the hob on again and reset.
¡ High-pressure or steam jet cleaners
10.2 Cleaning the glass ceramic
Clean the hob after every use to stop cooking residues
from getting burnt on.
Note: Note the information on unsuitable cleaning
products. → Page 9
Requirement: The hob has cooled down.
Remove heavy soiling using a glass scraper.
1.
Clean the hob with a cleaning product for glass
2.
ceramic.
Follow the cleaning instructions on the product
packaging.
Tip: You can achieve good cleaning results using a
special sponge for glass ceramic.
Basic settings en
until the required indicator ap-
until the required setting ap-
for
9