Siemens EH6..TE1.. Manual de instrucciones - Página 11
Navegue en línea o descargue pdf Manual de instrucciones para Placa Siemens EH6..TE1... Siemens EH6..TE1.. 16 páginas.
También para Siemens EH6..TE1..: Manual de instrucciones (16 páginas)
Imprimir página
Once the time has elapsed
The hotplate switches off. The warning signal sounds, and the
in the time program function visual display
seconds. The
indicator lights up on the hotplate display.
x
Pressing the
symbol turns off the indicators and stops the
0
beep.
Changing or cancelling the time
Press the
symbol several times until the required
0
indicator lights up. Change the cooking time using the + or -
symbols, or set to
.
‹‹
Notes
If a cooking time has been programmed in several zones, it
■
can be set to display all time values. To do this, press the
symbol several times until the
hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
■
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the
0
symbol several times until the required
indicator lights up. Change the cooking time using the + or -
symbols, or set to
‹‹
.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
Childproof lock
™‚
‹
Deactivated.*
Activated.
‚
™ƒ
Sound signals
Confirmation beep and error signal deactivated.
‹
‚
Only confirmation beep deactivated.
All signals activated.*
ƒ
™†
Automatic timer
Switched off.*
‹
‚
-
ŠŠ
Automatic shut-off time
*Factory settings
appears for 10
‹‹
x
x
indicator for the required
x
and
"
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the
symbol several times until the
0
1.
up.
appears in the time program function display.
‹‹
Press the + or - symbol on the time program function. The
2.
basic setting will appear.
+ symbol: 10 minutes.
- symbol: 05 minutes.
Set the time required using the + or - symbols.
3.
0
After a few seconds, the timer will start to count down.
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹
is shown, and the
the indicators turn off.
Pressing the
symbol turns off the indicators and stops the
0
beep.
Changing or cancelling the time
Press the
symbol several times until the
0
up. Change the cooking time or set to
symbols + or -,
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
‰
W
W
indicator comes on. After 10 seconds
indicator lights
W
with the
‹‹
indicator lights
11