Siemens EH8 SB1 Series Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Placa Siemens EH8 SB1 Series. Siemens EH8 SB1 Series 12 páginas.
También para Siemens EH8 SB1 Series: Manual de instrucciones (16 páginas)

Imprimir página
Changing or cancelling the time
Press the
0
symbol of the desired hotplate. Change the
cooking time in the programming panel, or set to

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
heat indicator
/
flash alternatively in the display.
œ
•

Cleaning protection

Cleaning the control panel while the range is on may change
the settings.
In order to avoid this, the range has a cleaning protection
function. Press the
symbol. An audible signal sounds. The
#
control panel is locked for 35 seconds. The surface of the

Basic settings

The device has several basic settings. The settings can be
adapted to the user's own needs.
Indicator
Function
Childproof lock
™‚
Off.*
‹
‚
On.
™ƒ
Audible signals
‹
Most signals deactivated.
Some signals deactivated.
‚
ƒ
All signals activated.*
™†
Automatic timer
‹
Switched off.*
-
Automatic shut-off time
‚
ŠŠ
Duration of the time program function warning signal
™‡
10 seconds*.
‚
30 seconds.
ƒ
1 minute.
„
Power-Management function
™ˆ
= Deactivated.*
‹
= 1,000 W. minimum power.
‚
. = 1,500 W.
‚
= 2,000 W.
ƒ
etc.
Š
or
Š
. = hob maximum power.
Return to default settings
™‹
Personal settings.*
‹
‚
Return to factory settings.
* Factory settings
.
‹‹
symbol and the residual
"‰
Note: When the timer is activated, the corresponding hotplate
is locked. First turn off the timer and then the hotplate.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
control panel can now be cleaned without risk of changing the
settings.
Note: The lock does not affect the main switch. The range may
be switched off when desired.
9