Siemens EH8 Series Manual de instrucciones - Página 11
Navegue en línea o descargue pdf Manual de instrucciones para Placa Siemens EH8 Series. Siemens EH8 Series 20 páginas. Full surface induction cooktop
También para Siemens EH8 Series: Manual de instrucciones (34 páginas), Manual de instrucciones (20 páginas)
Imprimir página
Select hours. Slide your finger up or down and set the
3.
desired cooking time in hours.
K
PLQ
Safety shut-down
If a cooking position is in use for a long time without the
settings being changed, the safety shut-down is activated.
The cooking position switches off. "Cooking position in use for
too long" appears in the display. Touch the
display goes out. You can make new settings.
Transferring settings
Short-term memory
As soon as you lift the cookware or move it on the cooktop, all
settings of the cooking position are saved for a short time (10-
90 seconds). The cooking position does not heat.
PLQ
K
PLQ
symbol. The
±
The set cooking time has been applied. The cooking time starts
conunting down in the display.
K
When the cooking time has elapsed
When the cooking time has elapsed, the cooking position
switches off. A signal sounds. 00:00
up in the hotplate display.
Note: You can set a cooking time of up to 9 hours and
59 minutes. Depending on the power level set, the cooking
position may also switch off before the cooking time has
elapsed. See section Safety shut-down.
To correct the cooking time: touch the
cooking time.
To delete the cooking time: touch the
.
00
00
h
min
When the safety shut-down is activated depends on the power
level which has been set. For more information, see section
Resolving malfunctions.
Note: For the duration of the short-term memory, you can
change the settings of the cooking position (exception:
powerBoost function and timer).
Place the cookware back onto the same position within the
duration of the short-term memory. The settings are
automatically applied. The cooking position heats up.
Notes
If the position differs significantly from the original position,
■
use the transfer function
To find out how to change the duration of the short-term
■
memory, see section Options menu.
and power level 0.0 light
min
symbol and reset the
x
symbol and reset to
x
11