Siemens EH8 SP1 Series Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Placa Siemens EH8 SP1 Series. Siemens EH8 SP1 Series 16 páginas.

Imprimir página

Timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. The hob must be switched

on. The timer can be set for any hotplate not turned on. This

function does not automatically switch off a hotplate.

How to program

Press the symbol

for the hotplate, the indicator

turned on.

lights up in the time program function display.

‹‹

Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The

heat indicator

flash alternatively in the display.

•

Cleaning lock function

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

symbol. A signal sounds. The control panel is

Basic settings

The device has several basic settings. These settings may be

adapted to the user's individual needs.

Indicator

Function

Childproof lock

™‚

Deactivated.*

‹

‚

Activated.

™ƒ

Sound signals

‹

Confirmation beep and error signal deactivated.

Only confirmation beep deactivated.

‚

All signals activated.*

Automatic timer

™†

‹

Switched off.*

‚

ŠŠ

Automatic shut-off time

Duration of the time program function warning signal

™‡

10 seconds*.

‚

30 seconds.

„

1 minute.

*Factory settings

symbol and the residual

"‰

Once the time has elapsed

A warning beep sounds. In the time program function

display

is shown, and the

‹‹

After 10 seconds the indicators turn off.

Pressing the

symbol turns off the indicators and stops the

beep.

Changing or cancelling the time

Press the

symbol of the desired hotplate. Change the

cooking time in the programming panel, or set to

Note: When the timer is activated, the corresponding hotplate

is locked. First turn off the timer and then the hotplate.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

locked for 35 seconds. The surface of the control panel can

now be cleaned without risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

indicator comes on.

‹‹