Siemens EH8..FM Series Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Placa Siemens EH8..FM Series. Siemens EH8..FM Series 16 páginas.
También para Siemens EH8..FM Series: Manual de instrucciones (21 páginas)
Imprimir página
Accessing the basic settings
The hob should be turned off.
Switch on the hob using the main switch.
1.
Within the next 10 seconds, press and hold the
2.
for 4 seconds.
In the display
and
alternately light up and
™
‚
a default setting.
Press the
symbol several times until the desired function
'
3.
indicator appears.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
Clean the hob after each use. This prevents food remains left
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
on the surface from burning. Wait until the hob is cool enough
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Only use cleaning products specifically designed for hobs.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Follow the instructions provided on the packaging.
Follow the instructions provided on the packaging.
Do not use:
Undiluted washing-up liquid
■
Dishwasher detergent
■
Abrasive products
■
Corrosive products such as oven sprays or stain removers
Corrosive products such as oven sprays or stain removers
Corrosive products such as oven sprays or stain removers
■
Sponges that may scratch
■
High-pressure or steam cleaners
■
Fixing malfunctions
Malfunctions are usually due to small details. Before calling the
Technical Assistance Service you should bear in mind the
following advice and warnings.
Indicator
Malfunction
none
The electric power supply has been cut off. Use other electrical appliances to check whether there has been a
The appliance has not been correctly con-
nected following the connection diagram.
Electronic system malfunction.
* If the warning persists call the Technical Assistance Service.
Do not rest hot pans on the control panel.
12
Then select the desired setting with the programming zone.
4.
symbol
'
Press and hold the
5.
4 seconds.
The settings will have been correctly saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
lights up as
‹
The best way to remove stubborn stains is to use a glass
The best way to remove stubborn stains is to use a glass
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
scraper. Follow the manufacturer's instructions.
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Suitable glass scrapers can be obtained through the Technical
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.
Assistance Service or from our online shop.
Assistance Service or from our online shop.
Hob frame
Hob frame
Hob frame
In order to avoid damage to the hob frame, follow the
In order to avoid damage to the hob frame, follow the
In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
Solution
power cut.
Check that the appliance has been connected correctly according
to the connection diagram.
If none of the above checks resolve the malfunction, contact the
Technical Assistance Service.
'
symbol again for more than