Cisco 7945G - Unified IP Phone VoIP Preparación de la instalación - Página 15

Navegue en línea o descargue pdf Preparación de la instalación para Teléfono IP Cisco 7945G - Unified IP Phone VoIP. Cisco 7945G - Unified IP Phone VoIP 17 páginas. Unified ip phone
También para Cisco 7945G - Unified IP Phone VoIP: Manual del usuario (4 páginas), Manual del usuario (23 páginas), Manual de instalación (19 páginas), Manual rápido (12 páginas), Manual rápido (15 páginas), Manual de administración (6 páginas), Manual (9 páginas), Manual de consulta rápida (3 páginas), Solución de problemas y mantenimiento (25 páginas), Manual del usuario (42 páginas)

Imprimir página
Cisco 7945G - Unified IP Phone VoIP Preparación de la instalación
Chapter 2
Preparing to Install the Cisco Unified IP Phone on Your Network

Converting an In-Use Phone from One Protocol to the Other Protocol

For information about how to convert an in-use phone from one protocol to the other, see the Cisco
Unified Communications Manager Administration Guide,
section Migration Existing Phone Configuration to a Different Phone.

Deploying a Phone in an SCCP and SIP Environment

To deploy Cisco Unified IP Phones in an environment that includes SCCP and SIP and in which the
Cisco Unified Communications Manager Auto-Registration parameter is SCCP, perform these general
steps:
1.
2.
3.
4.

Determining the MAC Address of a Cisco Unified IP Phone

Several of the procedures that are described in this manual require you to determine the MAC address
of a Cisco Unified IP Phone. You can determine the MAC address for a phone in any of these ways:
•
•
•
OL-23092-01
Set the Cisco Unified Communications Manager auto_registration_protocol parameter to SCCP.
From Cisco Unified Communications Manager Administration, choose System > Enterprise
Parameters.
Install the phones.
Change the Auto Registration Protocol enterprise parameter to SIP.
Auto-register the SIP phones.
From the phone, choose Settings > Network Configuration and look at the MAC Address field.
Look at the MAC label on the back of the phone.
Display the web page for the phone and click the Device Information hyperlink.
For information about accessing the web page, see
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
Determining the MAC Address of a Cisco Unified IP Phone
Cisco Unified IP Phone
Accessing the Web Page for a Phone, page
Configuration,
8-2.
2-15