Cisco 7962G - Unified IP Phone VoIP Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 7962G - Unified IP Phone VoIP. Cisco 7962G - Unified IP Phone VoIP 23 páginas. Unified communications manager 9.0 (sccp and sip)
También para Cisco 7962G - Unified IP Phone VoIP: Ficha de datos (5 páginas), Manual del usuario (6 páginas), Manual del usuario (4 páginas), Especificaciones (5 páginas), Manual de administración (12 páginas), Manual del usuario (13 páginas), Manual del usuario (12 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (6 páginas), Manual de administración (16 páginas), Solución de problemas y mantenimiento (27 páginas)

When you have one or more new messages, the message-waiting indicator (MWI) on your handset is lit. The MWI

Note

works only if the MWI is configured on your phone.

Your company determines the voice message service that your phone system uses. For the most accurate and detailed

Note

information, see the documentation for your voice message service.

Adjust the Volume for the Current Call

To adjust the handset, speakerphone, or headset volume for the current call:

1. During a call, press the Up or Down Volume button.

2. Press the Save soft key to apply the new volume level to future calls.

• Press the Up or Down Volume button while the handset is in its cradle and the phone is idle.

To change the ringer sound:

1. Press the Settings button.

2. Press 2 for Ring Type, or use the Navigation button to scroll to Ring Type and press the Select soft key.

3. Use the Navigation button to scroll through the list of ring types. Press the Play soft key to hear samples.

4. Highlight the ring you want, and then press the Select soft key.

5. Press the Ok soft key to select your setting.

6. Press the Save soft key to save the setting, or press Cancel to exit to the previous menu without changing the setting.

7. Press the Exit soft key to go to the main directory menu.

To adjust the contrast in your LCD display:

1. Press the Settings button.

2. Press 1 for Contrast, or use the Select soft key.

3. Use the Down or Up soft key to change the contrast.

4. Press the Ok soft key

5. Press the Save or Exit soft key.

6. Press the Ok soft key to select your contrast setting.

7. Press the Save soft key to save the setting, or press Cancel to exit to the previous menu without changing the setting.

8. Press the Exit soft key to go to the main directory menu.

In the following procedures, you might need to enter information using the keypad. Press the backspace (<<) soft key

Note

to erase digits that you enter incorrectly.