Cisco 7970 Series Puesta en marcha - Página 12

Navegue en línea o descargue pdf Puesta en marcha para Teléfono IP Cisco 7970 Series. Cisco 7970 Series 15 páginas. Unified ip phone
También para Cisco 7970 Series: Referencia rápida (2 páginas), Manual del teléfono (45 páginas)

Imprimir página

Adjusting the Placement of the Cisco IP Phone

Mounting the Phone to the Wall

Step 1

Step 2

Step 3

Step 4

Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3

3-12

You can mount the Cisco IP Phone on the wall using the footstand as a mounting

bracket or you can use special brackets available in a Cisco IP Phone wall mount

kit. (Wall mount kits must be ordered separately from the phones.) If you attach

the phone to a wall using the standard footstand and not the wall mount kit, you

need to supply the following tools and parts:

Screwdriver

•

Screws to secure the Cisco IP phone to the wall

•

Use the following procedure to mount the phone on the wall using the standard

footstand. See

Figure 3-2

Before You Begin

To ensure that the handset attaches securely to a wall-mounted phone, remove the

handset wall hook from the handset rest, rotate the hook 180 degrees, and reinsert

the hook. Turning the hook exposes a lip on which the handset catches when the

phone is vertical. For an illustrated procedure, see Installing the Wall Mount Kit

for the Cisco IP Phone.

Procedure

Push in the footstand adjustment knob.

Adjust the footstand so it is flat against the back of the phone.

Insert two screws into a wall stud, matching them to the two screw holes on the

back of the footstand.

The keyholes fit standard phone jack mounts.

Hang the phone on the wall.

Chapter 3

for a graphical overview of this procedure.

Setting Up the Cisco IP Phone

OL-4314-01