Epson EasyMP Network Projection Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Proyector Epson EasyMP Network Projection. Epson EasyMP Network Projection 48 páginas. Multimedia projector
También para Epson EasyMP Network Projection: Manual de instrucciones (47 páginas), Instrucciones de actualización (4 páginas), Manual de instrucciones (50 páginas), Manual de instrucciones (50 páginas), Manual de instrucciones (47 páginas), Manual de instrucciones (50 páginas), Manual de instrucciones (40 páginas), Manual de instrucciones (47 páginas)

Two Connection Modes

There are two methods of connecting a computer and the projector via a

network by using EasyMP Network Projection.

Advanced Connection Mode is an infrastructure connection, and connects

to an existing network system via a network cable.

When connecting to a network via Wired LAN, connect the projector to

the network hub with a commercially available LAN cable.

If you install the optional Wireless LAN unit in the projector, you can

connect to the network via a wireless LAN access point.

Quick Connection Mode (Only when the optional

Wireless LAN unit is installed)

Quick Connection Mode is only available when you install the optional

Wireless LAN unit in the projector.

Quick Connection Mode temporarily assigns the projector's SSID to a

computer creating an ad hoc

network settings after disconnecting.

connection, and restores the computer's

p.11

• You can easily connect to a computer and project images from the

computer without making network settings.

• This lets you connect easily without a connector cable, and you can

even connect if the projector and the computer are at remote locations.

Use the following steps to connect the computer to the projector and

project in EasyMP Network Projection.

You need to perform steps 1 to 4 only the first time you connect.

Install EasyMP Network Projection on the computer to be connected.

p.6

Make network settings on the computer and put it into network

connection status. s

p.11

For Quick Connection Mode: Install the optional Wireless LAN unit in

the projector (if already installed, go to step 5).

For Advanced Connection Mode: Enable the Wired LAN or Wireless

LAN adapter in "Port Configurations". s Computer's documentation