Cisco 8800 Series Manual - Página 11

Cisco IP Phone Accessories

Select a USB Headset

You can only plug in one USB headset. If you are using an analog headset, you can switch to your USB

headset by using the Accessories window of the phone.

Procedure

Step 1

On your phone, press Applications

Step 2

Select Status.

Step 3

Select Accessories.

Step 4

Press the Navigation cluster, up or down, to select the USB headset.

Stop Using a USB Headset

You can stop using your USB headset and select a different headset in the Accessories window of the phone.

Procedure

Step 1

On your phone, press Applications

Step 2

Select Status.

Step 3

Select Accessories.

Step 4

Press the Navigation cluster, up or down, to select a different headset.

Wireless Headsets

You can use most wireless headsets with your phone. For a list of supported wireless headsets, see

http://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_accessories.html

Refer to your wireless headset documentation for information about connecting the headset and using the

features.

Bluetooth Wireless Headsets

For a list of supported headsets, see

endpoints_accessories.html.

Bluetooth enables low-bandwidth wireless connections within a range of 30 feet (10 meters). The best

performance is in the 3- to 6-foot (1- to 2-meter) range. Bluetooth wireless technology operates in the 2.4

GHz band, which is the same as the 802.11b/g band.

Cisco IP Phones use a shared key authentication and encryption method to connect up to fifty headsets, one

at a time. The last connected headset is used as the default. Pairing is typically performed once for each

headset.

http://www.cisco.com/c/en/us/products/unified-communications/uc_

Select a USB Headset

Cisco IP Phone Accessories