Cisco 8841 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 8841. Cisco 8841 40 páginas. Mpp phones
También para Cisco 8841: Notas de publicación (24 páginas), Manual del usuario (16 páginas), Manual de consulta rápida (7 páginas), Características (16 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (2 páginas), Manual de consulta rápida (2 páginas), Manual de consulta rápida (2 páginas), Manual rápido (2 páginas), Manual de consulta rápida (6 páginas), Manual del usuario (24 páginas), Manual del usuario (28 páginas), Manual maestro de migración de firmware (31 páginas), Manual del usuario (30 páginas), Manual del usuario (29 páginas), Manual (44 páginas), Manual de inicio rápido (2 páginas), Manual abreviado (2 páginas), Manual de inicio rápido (2 páginas), Manual de reconfiguración (2 páginas), Manual de inicio rápido (6 páginas), Manual (22 páginas), Primeros pasos (2 páginas), Manual de inicio rápido (2 páginas), Manual (48 páginas), Inicio rápido (2 páginas)

Imprimir página

Find Information about Your Phone

Your administrator may ask for information about your phone. This information uniquely identifies the phone for

troubleshooting purposes.

Procedure

Step 1 Press Applications

Step 2 Select Status > Product Information.

You can view the following information:

Product name - Model number of the Cisco IP Phone.

Serial number - Serial number of the Cisco IP Phone.

MAC address - Hardware address of the Cisco IP Phone.

Software version - Version number of the Cisco IP Phone firmware.

Hardware version - Version number of the Cisco IP Phone hardware.

Certificate - Status of the client certificate, which authenticates the Cisco IP Phone for use in the ITSP

network. This field indicates if the client certificate is properly installed in the phone.

Customization - For an RC unit, this field indicates whether the unit has been customized or not.

Pending indicates a new RC unit that is ready for provisioning. If the unit has already retrieved its

customized profile, this field displays the Customization state as Acquired.

Step 3 Press Exit to return to the Applications screen.

View the Network Status

Procedure

Step 1 Press Applications

Step 2 Select Status > Network Status.

You can view the following information:

• Network type - Indicates the type of Local Area Network (LAN) connection that the phone uses.

• Network status - Indicates if the phone is connected to a network.

• IPv4 - IP address of the phone. You can see information on IP address, VLAN ID, Addressing type, IP

status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

• IPv6 - IP address of the phone. You can see information on IP address, VLAN ID, Addressing type, IP

status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

• MAC address - Unique Media Access Control (MAC) address of the phone.

• Host name - Displays the current host name assigned to the phone.

• Domain - Displays the network domain name of the phone. Default: cisco.com

• Switch port link - Status of the switch port.

• Switch port config - Indicates speed and duplex of the network port.

• PC port config - Indicates speed and duplex of the PC port.

• PC port link - Indicates speed and duplex of the PC port.

View the Phone Status

Procedure

Step 1 Press Applications

Step 2 Select Status > Phone Status > Phone Status.

You can view the following information:

• Elapsed time - Total time elapsed since the last reboot of the system

• Tx (Packets) - Transmitted packets from the phone.

• Rx (Packets) - Received packets from the phone.

10 |

P a g e

!"#$%&'(&()%*+&,,--&.+/"+#&0#+/&12"3+