Cisco 8851 Manual del usuario - Página 20

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 8851. Cisco 8851 24 páginas. Mpp
También para Cisco 8851: Notas de publicación (24 páginas), Manual del usuario (15 páginas), Manual del usuario (16 páginas), Manual de consulta rápida (7 páginas), Características (16 páginas), Manual de inicio rápido (2 páginas), Manual de consulta rápida (2 páginas), Manual rápido (2 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (20 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (28 páginas), Manual maestro de migración de firmware (31 páginas), Manual del usuario (30 páginas), Manual del usuario (29 páginas), Manual (44 páginas), Manual (13 páginas), Manual (14 páginas), Manual de inicio rápido (2 páginas), Manual de instalación (39 páginas), Manual (5 páginas), Manual de inicio rápido (2 páginas), Manual abreviado (2 páginas), Manual de consulta rápida (3 páginas), Manual del usuario (11 páginas), Manual de inicio rápido (2 páginas), Manual de reconfiguración (2 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (6 páginas), Manual (22 páginas), Manual (22 páginas), Manual de inicio rápido (2 páginas), Primeros pasos (2 páginas), Manual (48 páginas), Manual del usuario (40 páginas), Manual de consulta rápida (7 páginas), Inicio rápido (2 páginas), Manual de consulta rápida (8 páginas)

Turn On Your Phone

• Power Save Plus—Your phone screen turns on and off at times that are based on your work schedule.

For example, your administrator can set your phone to alert you 10 minutes before it turns off. You see the

Select button light up and you get a message that your phone is turning off soon. You get notifications at these

intervals:

• Four rings at 10 minutes before power off

• Four rings at 7 minutes before power off

• Four rings at 4 minutes before power off

• 15 rings at 30 seconds before power off

If your phone is active, it waits until it has been inactive for a set interval before it notifies you of the pending

power shutdown.

Turn On Your Phone

When your phone turns off to save energy, the phone screen is blank and the Select button lights up.

Procedure

Press Select to turn your phone back on.

Phone Line Modes

Your phone can be set up in one of these modes:

• Normal line mode—In this mode, the buttons to the left and right of the screen have different functions.

• Enhanced line mode—In this mode, the buttons on the left and right of the screen can be set up as line

Normal Line Mode

When your phone is set up for normal (Session) line mode, you interact with the phone in these ways:

• Use the New call window to place a call.

• Select Answer to answer a call, unless your phone is set up for an Incoming Call alert. If your phone is

• Five line keys are available. If your phone is connected to your mobile device or tablet with Bluetooth,

Cisco IP Phone 8800 Series User Guide

If your work hours or work days change, you can contact your administrator to reconfigure your phone.

Usually, the left buttons are the line buttons and the right buttons are the feature buttons. The line and

feature buttons are reversed for locales that read from right to left. This mode is also known as session

line mode.

buttons. This mode increases the number of phone lines that you can see and use. You see an alert for

an incoming call.

set up for an Incoming Call alert, select Answer, Decline, or Ignore.

only four line keys are available.

Your Phone