Cisco 8851 Manual - Página 4

Imprimir página

resume the call at your desk phone. If

you do not resume the call at your desk

phone, the call will automatically end

after 5 seconds.

Send Mobile Call back to Desk Phone

To transfer a mobile connect call from your

mobile phone back to your desk phone:

Note: This option is only available for calls

that were previously transferred to a

mobile phone using "Send to Mobile".

§ Verify the line on your phone is

illuminated red, indicating that you

currently have a call transferred using

"Send to Mobile"

§ End the call on your mobile device. The

system will automatically put the call on

hold at your desk phone.

§ Press the line key associated with the

call that is on hold.

Note: Typically a line will flash red if it has

a call on hold.

§ The call should now be active on your

desk phone.

Note: If you do not answer the call on hold

within 5 seconds the call will end.

Managing your phone from the

Web

To manage features such as speed dials

(phone buttons), abbreviated dials

(softkeys), Phone Contacts:

§ Access:

https://callmgrpub01.hofstra.edu/ucmuser/

§ ID: 5-digit Extension (3XXXX)

§ Password: 12345

Speed Dial Configuration

To create additional speed dials:

§

Click Phones tab

§

Click Phone Settings

§

Click Speed Dial Numbers

§

Do the following:

If your phones are linked,

click Add New Speed Dial

If your phones are not

linked, select the phone for

which you want to add the

speed dial number, and

then click Add New Speed

Dial

Enter in the Number

Enter in Label

Assign speed dial number

(1-199)

Click Save

Call Forwarding

§ Click Phones tab

§ In the left navigation pane, click Call

Forwarding

§ Click the phone number on which you

want to set up call forwarding

§ Check the Forward all calls to: check

box

§ From the Forward calls to drop-down list

box, enter the phone number to which

you want to forward all calls

§ Click Save

To turn forwarding off:

§ Uncheck the "Forward all calls to" box

§ Click Save

Do Not Disturb

§ Click the IM & Availability tab

§ Check the "turn on" box under the Do

§ Uncheck the box to turn DND off

Phone Contacts

§

Ring Settings

Customize your shared line ringtones.

§ Press Phones tab across the top of the

§ Press Phone Settings tab

§ Select Ring Settings

§ Select the phone number and customize

§ Click Save

Single Number Reach

SNR allows you to provide an additional

number where you can be reached if you

are not at your desk.

Set up an Additional Phone:

Not Disturb section

Press Phones tab across the top of the

page

Press Phone Settings tab

Click Create New Contact. The Add

New Phone Contact window appears.

Complete the fields with the contact

information for the contact

Click OK

page

When I'm on a call and When I'm not

on a call from the drop down arrow

§ Click the Phones tab

§ In the left navigation, click My Phones