Cisco 8851 Manual - Página 10

Navegue en línea o descargue pdf Manual para Teléfono IP Cisco 8851. Cisco 8851 48 páginas. Mpp
También para Cisco 8851: Notas de publicación (24 páginas), Manual del usuario (15 páginas), Manual del usuario (16 páginas), Manual de consulta rápida (7 páginas), Características (16 páginas), Manual de inicio rápido (2 páginas), Manual de consulta rápida (2 páginas), Manual rápido (2 páginas), Manual del usuario (24 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (20 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (28 páginas), Manual maestro de migración de firmware (31 páginas), Manual del usuario (30 páginas), Manual del usuario (29 páginas), Manual (44 páginas), Manual (13 páginas), Manual (14 páginas), Manual de inicio rápido (2 páginas), Manual de instalación (39 páginas), Manual (5 páginas), Manual de inicio rápido (2 páginas), Manual abreviado (2 páginas), Manual de consulta rápida (3 páginas), Manual del usuario (11 páginas), Manual de inicio rápido (2 páginas), Manual de reconfiguración (2 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (6 páginas), Manual (22 páginas), Manual (22 páginas), Manual de inicio rápido (2 páginas), Primeros pasos (2 páginas), Manual del usuario (40 páginas), Manual de consulta rápida (7 páginas), Inicio rápido (2 páginas), Manual de consulta rápida (8 páginas)

Cisco 8851 Manual
Audio Quality
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Provisioning.
Step 2
Under the Cisco Headset Firmware Upgrade section, find the parameter Cisco Headset Upgrade Rule.
Step 3
Specify the TFTP, HTTP, or HTTPS protocol, an IP address of the headset upgrade device, and the name of
the headset XML file. Enter the values as a single string in the parameter.
Caution
For example,
You can also configure this parameter in the configuration file (cfg.xml):
<Cisco_Headset_Upgrade_Rule
ua="na">tftp://10.74.51.81/prov/headset/1-6-0-162/ciscoheadsetfirmware.xml</Cisco_Headset_Upgrade_Rule>
Step 4
Click Submit All Changes.
If a new version of the headset firmware is detected, the phone displays an upgrade prompt.
Audio Quality
Beyond physical, mechanical, and technical performance, the audio portion of a headset must sound good to
the user and to the party on the far end. Sound quality is subjective, and we cannot guarantee the performance
of any third-party headset. However, various headsets from leading headset manufacturers are reported to
perform well with Cisco IP Phones.
Cisco doesn't recommend or test any third-party headsets with their products. For information about third-party
headset support for Cisco products, go to the manufacturer's web site.
Cisco does test the Cisco headsets with the Cisco IP Phones. For information about Cisco Headsets and Cisco
IP Phone support, see https://www.cisco.com/c/en/us/products/collaboration-endpoints/headsets/index.html.
Analog Headsets
The phone cannot detect when an analog headset is plugged in. For this reason, the analog headset displays
by default in the Accessories window on the phone screen.
Displaying the analog headset as the default allows users to enable wideband for the analog headset.
USB Headsets
Wired and wireless USB headsets are supported. You can connect one USB headset (or the base station for
a wireless headset) to either the back USB port (if your phone has this port) or to the side USB port.
Cisco IP Phone Accessories
10
Do not change the headset XML file contents.
tftp://10.74.51.81/prov/headset/1-6-0-162/ciscoheadsetfirmware.xml
Access the Phone Web
Interface.
Cisco IP Phone Accessories