Cisco 8851 Manual - Página 6

Cisco Headset 561 and 562

Number

Cisco Headset 561 and 562

The Cisco Headset 560 Series are two wireless headsets that are developed for Cisco products and services.

The Cisco Headset 561 features a single earpiece, and offers lightweight comfort. The Cisco Headset 562

features two earpieces for use in a noisy environment or busy office.

The Cisco Headset 560 Series use a headset base to connect with Cisco IP Phones and charge the headsets.

The available options for the base are Standard base and Multibase. The Cisco Headset 560 Series with

Standard Base support connection with a single source from a phone or a computer. The Cisco Headset 560

Series with Multibase support multiple sources from phones, computers, and Bluetooth-paired devices and

provide an easy and intuitive switch among the connected sources.

You can connect the Cisco Headset 560 Series with any of the following:

• RJ9 and AUX connector (Y-cable)—Supported on Cisco IP Phones 8811, 8841, 8845, 8851, 8861, and

• USB connector—Supported on Cisco IP Phones 8851, 8861, and 8865 with multiple platforms.

The Cisco Headset 560 Series require Multiplatform Firmware Release 11.2(3) and higher. Upgrade your

phones to the latest firmware before using these headsets.

To check your phone model and the firmware version, press Applications

information. The Product name field shows your phone model. The Software version field shows the

installed load where you can get the firmware version.

Cisco Headset 561 and 562 Buttons and LED

Your headset buttons are used for basic call features.

Cisco IP Phone Accessories

Name

Call button

8865 with multiple platforms.

Description

Use to manage calls:

• Press once to answer an incoming call.

• Press and hold for 2 seconds to end a call.

• Press twice to reject an incoming call.

• Press once to put an active call on hold. Press again to

retrieve a call from hold.

Cisco IP Phone Accessories

and select Status > Product