Cisco 8865 Manual del usuario - Página 18

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 8865. Cisco 8865 30 páginas. Multiplatform phones
También para Cisco 8865: Características (16 páginas), Manual del usuario (24 páginas), Manual del usuario (28 páginas), Manual maestro de migración de firmware (31 páginas), Manual del usuario (23 páginas), Manual (44 páginas), Manual (43 páginas), Manual (14 páginas), Manual de instalación (39 páginas), Manual de reconfiguración (2 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (13 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (8 páginas), Manual (48 páginas), Manual (11 páginas), Manual del usuario (40 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas)

Step 4 Press 1.

Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.

Disable Call Forward – No Answer

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *92

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 2.

Enable Call Forward – Out of Service

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *94

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 1.

Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.

Disable Call Forward – Out of Service

Procedure

Lift the receiver and listen for dial tone

Step 1

Press *94

Step 2

When prompted, enter your PIN.

Step 3

Step 4 Press 2.

Transfer Calls

You can transfer an active call to another person.

Transfer a Call to Another Person

When you transfer a call, you can stay on the original call until the other person answers. This gives you an

opportunity to talk privately with the other person before you remove yourself from the call. If you don't want to

talk, then transfer the call before the other person answers.

You can also swap between both callers to consult with them individually before you remove yourself from the

call.

Procedure

Step 1 From a call that is not on hold, press Transfer

Step 2 Enter the other person's phone number.

Step 3 (Optional) Wait until you hear the line ring or until the other person answers the call.

18 |

P a g e

Cisco IP Phone 8800 Series User Guide