Cisco 8945 Primeros pasos - Página 17

Navegue en línea o descargue pdf Primeros pasos para Teléfono IP Cisco 8945. Cisco 8945 29 páginas. Unified ip standard phone
También para Cisco 8945: Ficha de datos (5 páginas), Manual del usuario (42 páginas), Notas de publicación (16 páginas), Manual de administración (16 páginas), Manual del usuario (24 páginas), Inicio rápido (2 páginas), Manual de inicio rápido (4 páginas), Manual del usuario (2 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (8 páginas), Manual del usuario (2 páginas), Manual de consulta rápida (5 páginas), Referencia rápida (2 páginas), Manual del usuario (2 páginas), Manual del usuario (3 páginas), Manual de formación (31 páginas), Características Manual (4 páginas), Vistazo rápido (3 páginas), Manual de referencia (28 páginas), Manual del usuario (20 páginas)

Imprimir página
Cisco 8945 Primeros pasos

Redial

Redial allows you to call the most recently dialled phone number by pressing a button.

Redial a Number

1. Press the Redial button, to place the call on a specific phone line.

Call Back

Use Call Back when you dial someone and receive a busy tone. This feature will alert
you once the line is free.

Set up a Call Back Notification

1. Press the Callback soft key while listening to the busy tone or ring
sound.
A confirmation screen displays on the phone.
2. Press the Exit soft key to exit the confirmation screen.
3. Your phone alerts you when the line is free. Then press the Dial soft
key to place the call again.

Transfer

Transfer allows you to redirect a connected call from your phone to another number:
You can redirect a single call to another number that you specify.
You can also connect two calls on one line or two different lines to each other
(without remaining on the line yourself).
Before completing a transfer procedure, you can press the Swap soft key to toggle
between calls, which allows you to speak privately with each party or the Cancel soft key
to cancel the transfer.
.

Transfer a call to another Number

1. Start with an active call (not on hold).
2. Press the Transfer button. On the top of the screen it will say "enter a
number to transfer" followed by pressing transfer to complete.
3. Do one of the following to enter the transfer recipient's phone number:
4. Press the Transfer button or the Transfer soft key. (You do not have
to wait for the recipient to answer to complete the transfer)
5. You will be notified if the transfer was successful.
Using the keypad, enter the transfer recipient's phone
number.
OR
Press a speed-dial button.
Calling Features
Page 11