Cisco 8945G Manual de consulta rápida - Página 2
Navegue en línea o descargue pdf Manual de consulta rápida para Teléfono IP Cisco 8945G. Cisco 8945G 2 páginas. Unified ip phones
Imprimir páginaVOICE MAIL SERVICES
Initial Set Up
•Press the Message button.
•Enter a password. (Default password is
88003#)
•Please follow system instructions for the
following: • Record your name. • Set a new
password. • Record your greeting.
•Please wait until you hear "You Have
Finished Enrollment" then hang up.
To Check Messages from your
telephone:
•Press the Message button and log on.
•New messages will start to play.
•Follow prompts to manage individual
messages.
To Check Messages from outside
the office:
•On-Campus Dial 6-9999
Off-Campus Dial 575-646-9999
•When the greeting begins to play, press *
•Enter last 5 digits of your extension number
(id), then press #
•Enter your pin then press #
•Follow prompts to listen and manage your
messages
To Change Your Recorded Name:
•Press the Message button and log on.
•When greeting starts, Press 4 >3 >2.
•At the tone, record your name, or press *
to keep the current recording.
To Change Your Password:
•Press the Message button and log on.
•Press 4 >3 >1.
•Enter a new password and press #.
•Enter the new password again to confirm it
and press #.
To Record a Greeting:
•Press the Message button and log on.
•Press 4 > 1 > 1.
•After your current greeting, press 1 to
rerecord new greeting
•Press #
•Follow prompts
To Enable or Disable a Greeting:
(You can enable or disable only your
alternate greeting by phone.)
•Press the Message button and log on.
•Press 4 >1 >1.
•After your current greeting, press 2 to
enable or disable your alternate greeting.
Note: When your alternate greeting is enabled, it
overrides all other greetings.
To Reply to a Message:
•After listening to the message, press 4.
Record your reply.
•Press # to send the reply, or press 1 for
message options.
Message Options are the same as above.
Follow the prompts to handle the original
message.
To Forward a Message:
•After listening to the message, press 5.
•Follow prompts to address the forwarded
message.
•Press # to forward the message as is, or
press 2 to record an introduction, or press 3
for message options.
•Press # to forward the message as is, or
press 1 for message options.