Cisco Cisco Access Registrar 4.2 Configuración de los ajustes de red - Página 21

Navegue en línea o descargue pdf Configuración de los ajustes de red para Teléfono IP Cisco Cisco Access Registrar 4.2. Cisco Cisco Access Registrar 4.2 34 páginas. Telepresence conference system
También para Cisco Cisco Access Registrar 4.2: Manual del usuario (44 páginas), Manual de introducción (46 páginas)

Imprimir página

Cisco Cisco Access Registrar 4.2 Configuración de los ajustes de red

Chapter 4

Configuring Network Settings on the Cisco Unified IP Phone

Step 6

Step 7

Assigning a Subnet Mask

Using the Phone Configuration Web Page

Step 1

Step 2

Step 3

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone

OL-8617-01

Press Validat.

Press Save.

The subnet mask is used to partition the IP address into a network and a host

identifier. The subnet mask is used to mask a portion of the IP address so that

TCP/IP can distinguish the network ID from the host ID.

Before you can assign a subnet mask, you must disable DHCP. For instructions,

see the

"Disabling DHCP" section on page

To assign a subnet mask for the Cisco Unified IP Phone, follow these steps:

Procedure

Display the Phone Configuration web page.

For instructions, see the

Configuration Web Page" section on page

In the pane on the left under Change Configuration, click Network Parameters.

You may be prompted to enter a password.

The Network Parameters web page appears.

To set the subnet mask, enter an address in the StaticNetMask field and click

Apply.

4-15.

"Accessing Network Settings through a Phone

4-2.

Configuring IP Settings

4-21