Cisco IP DECT 6825 Instalación del hardware - Página 13

Navegue en línea o descargue pdf Instalación del hardware para Teléfono IP Cisco IP DECT 6825. Cisco IP DECT 6825 18 páginas. Masergy
También para Cisco IP DECT 6825: Manual del usuario (17 páginas), Manual del usuario (37 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (7 páginas)

Hardware Installation

• With the ceiling mount bracket: Hold the device with the lettering in the Cisco logo on the bottom and

Step 8

Plug the Ethernet cable into the LAN port.

Step 9

If required, plug the power adapter into the electrical outlet.

What to do next

Configure the Base Station

Install the Battery in the Handset

The handset battery is shipped inside the handset, but there is a plastic tab over the battery contacts. You need

to remove the plastic tab.

Procedure

Step 1

On the back of the handset, turn the latch counterclockwise to unlock the back, lift the clip, and lift the cover

to remove the battery cover.

turn slightly right. Align the slots on the underside of the device with the hooks on the bracket, press the

device into the bracket, and turn it left until the device is attached.

Install the Battery in the Handset

Hardware Installation