Cisco Linksys PAP2 Manual de instalación y solución de problemas - Página 28
Navegue en línea o descargue pdf Manual de instalación y solución de problemas para Teléfono IP Cisco Linksys PAP2. Cisco Linksys PAP2 46 páginas. Cisco ip phone adapter with 2 ports for voice-over-ip installation and troubleshooting guide
Imprimir página
Phone Adapter with 2 Ports for Voice-over-IP
8. Repeat steps 5-7 until you have entered all four port ranges for the Phone Adapter.
Application
Start and End
Internet phone 1
5060 to 5061
Internet phone 2
53 to 53
Internet phone 3
69 to 69
Internet phone 4
10000 to 20000
9. Check the Enable option for the port services you want to use.
10. When you have completed the configuration, click the Save Settings button.
5. The Power LED does not light up or lights up red.
Go through this checklist until your problem is solved:
•
Unplug the power adapter from the Phone Adapter. Wait five seconds. Then plug the power adapter into
the Phone Adapter again.
•
You may be using the wrong power adapter. Make sure the power adapter you are using is the one
included with the Phone Adapter.
22
Protocol
IP Address
UDP
(IP address of
Phone Adapter)
UDP
(IP address of
Phone Adapter)
UDP
(IP address of
Phone Adapter)
UDP
(IP address of
Phone Adapter)
Enable
X
X
X
X
Common Problems and Solutions
Appendix A: Troubleshooting