Cisco Small Business Pro SPA 509G Manual de configuración - Página 5

Navegue en línea o descargue pdf Manual de configuración para Teléfono IP Cisco Small Business Pro SPA 509G. Cisco Small Business Pro SPA 509G 12 páginas. Cisco small business spa300 / spa500 series
También para Cisco Small Business Pro SPA 509G: Manual del usuario (18 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (7 páginas), Manual rápido del usuario (2 páginas), Manual de inicio rápido (14 páginas), Manual de configuración (12 páginas), Manual de referencia (6 páginas), Manual del usuario (12 páginas), Cómo configurar (4 páginas), Primeros pasos (5 páginas), Tarjeta de referencia rápida (2 páginas), Manual de inicio rápido (7 páginas)

Set the "Display Name" field to the name you want to appear on the



Phone display

Set the "User ID" field to the extension number you want to



associate with this phone

Set the "Password" field to the extension's Authentication Password



Set the "Use Auth ID" field to "yes"



Set the "Auth ID" field to the extension's Authentication ID In the



"Dial Plan" section, set the "Dial Plan" field to "[x*]." (without the

quotes)

5. Next, we need to configure the Voice Mail Number on the phone to be able

to retrieve Voice Mail messages from MyPBX. Click on the "Phone" tab and set

the "Voice Mail Number" field to Voice Mail Number you have set in MyPBX.

6. Next, we need to adjust the audio parameters. Click on the "SIP" tab and, in

the "RTP Parameters" section, set the "RTP Packet Size" field to "0.020"

Click the "Submit All Changes" button at the bottom of the page. Your phone will

restart. After rebooting, the phone will register with the MyPBX. This can be

verified via the "line Status" page of the MyPBX Management Console.

Configuration for Remote Extensions

If you want to configure the phone as a Remote Extension, you will need to

ensure that the "Proxy" field is set to the Public IP Address of the PBX, and also

perform the following configuration adjustments:

1. Go to the "Ext1" tab

2. Go to the "NAT Settings" section

3. Set the "NAT Mapping Enable" field to "yes"

4. Set the "NAT Keep Alive Enable" field to "yes"

www.yeastar.com

Cisco IP Phone Configuration Guides

Figure 1-5

Figure 1-6

Figure 2-1

Page 5