Cisco SPA 303 Series Manual de instalación y solución de problemas - Página 3

Navegue en línea o descargue pdf Manual de instalación y solución de problemas para Teléfono IP Cisco SPA 303 Series. Cisco SPA 303 Series 11 páginas. Cisco small business spa300 / spa500 series
También para Cisco SPA 303 Series: Manual de inicio rápido (2 páginas), Ficha de datos (7 páginas), Manual de inicio rápido (5 páginas), Manual de inicio rápido (6 páginas), Manual de inicio rápido (18 páginas), Manual rápido del usuario (2 páginas), Manual del usuario (6 páginas), Manual del usuario (12 páginas), Manual de inicio rápido (2 páginas)

Phone.com Setup and Troubleshooting Guide

Cisco SPA303 IP Phone

Connecting It To Your Network

Use the Ethernet cable that came with your Cisco SPA303 IP Phone

to connect an available LAN port on your router to the SW port of

your phone (see the solid blue line in Figure 1).

If you only have one Ethernet connection nearby and need a

computer to share that connection, use another Ethernet cable to

connect the network port on your computer to the PC port of your

phone (see the dashed blue line in Figure 1).

The first time you plug in your SPA303, it will take a

few minutes and will reboot twice. Your phone is

ready for use once you see both of the following:

• A text logo on the screen that says

"Phone.com"

• Your phone's extension number next to a

green line key

Revised: May 28, 2014

Figure 1: Phone diagram and network setup

Don't power-cycle your

phone if the screen

shows the firmware

updating. You might

corrupt the firmware

and cause the phone to

malfunction.

Page 3 of 11