Ricoh Aficio AP4510 Manual complementario - Página 13

Navegue en línea o descargue pdf Manual complementario para Impresora Ricoh Aficio AP4510. Ricoh Aficio AP4510 38 páginas. Sap printing
También para Ricoh Aficio AP4510: Manual de instrucciones (32 páginas), Manual de sustitución (2 páginas), Procedimientos de instalación (2 páginas), Manual de instalación (4 páginas), Manual (12 páginas), Manual de instalación rápida (2 páginas)

Solaris

❖ ❖ ❖ ❖ Adding the IP address and host name to the /etc/hosts file

The following line is added to the /etc/hosts file. The IP address and printer

host name which you previously entered in the installation script will be

used.

192.168.15.16 nphost # Network Printer

• 192.168.15.16 is the IP address, nphost is the host name, from # to the end

of the line is a comment.

Note

❒ The /etc/hosts file contains a list of the IP addresses and their host names

of all of the hosts communicating on the network. Each entry is delimited

with a space or a tab, and each line is separated with a return.

❒ If you do not use NIS or DNS, you must manually enter the IP address and

host name of each workstation using the network printer in the /etc/hosts

file.

❖ ❖ ❖ ❖ Registering the printer

The installation shell script registers the printer as a remote printer.

If your workstation is Solaris 2.5.1, register the print server and print client

to the print service.

# lpsystem -t bsd -R 0 -y " " " " Network Printer" " " " nphost

# lpadmin -p np -s nphost!"option" -T dump -I any

• np is the printer name, nphost is the host name. For more information

about "option", see p.16 "Specifying the Device Option".

"lp" will be assigned, if the option is not used.

When printing with the lp command, use ( _ ) instead of ( = ) and ( ; )

instead of ( , ) for operating systems that cannot use ( = ) and ( , ) such as

Solaris 2.5 or later.

If your workstation is Solaris 2.5.1, set the print job to active so that it can