Cisco Unified 6921 Manual del usuario - Página 4

Transfer button

Conference button

Hold button

Navigation bar and

Select button

Line 1 and Line 2

buttons

Headset button

10 Speakerphone button

11 Keypad

12 Mute button

Transfers a call.

Creates a conference call.

Places an active call on hold.

The Navigation bar allows you to scroll through menus and highlight

items. When phone is on-hook, displays phone numbers from your

Placed Call listing (up arrow) or your speed dials (down arrow).

The Select button (in the middle of the Navigation bar) allows you to

select a highlighted item.

Line 1 selects the primary phone line.

Depending on how your system administrator sets up the phone, Line

2 may provide access to:

• Secondary phone line

• Speed-dial number (speed-dial button)

• Web-based service (for example, a Personal Address Book button)

Buttons illuminate to indicate status:

• Green, steady—Active call

• Green, flashing—Held call

• Amber, flashing—Incoming call or reverting call

• Red, steady—Remote line in use (shared line)

• Red, flashing—Remote line on hold

Toggles the headset on or off. When the headset is on, the button is lit.

Toggles the speakerphone on or off. When the speakerphone is on, the

button is lit.

Allows you to dial phone numbers, enter letters, and select menu items

(by entering the item number).

Toggles the microphone on or off. When the microphone is muted, the

button is lit.

OL-23813-01