Ricoh Martini-C3 Boletín técnico - Página 27

Navegue en línea o descargue pdf Boletín técnico para Impresora Ricoh Martini-C3. Ricoh Martini-C3 36 páginas.

February 2008

Line Connection and Settings

1. Loop one end of the telephone cable [A] once, then enclose it with the ferrite

core [B] as shown.

NOTE:

• Attach the ferrite core at least 9 cm (3.5 in.) from the connector.

• Attach a ferrite core to the 2nd G3 line if two G3 boards are installed.

2. Connect the telephone cable to "LINE 2" jack.

-or-

If dual G3 boards are installed connect the cables to "LINE 2" and "LINE 3"

jacks.

3. Connect the machine power cord to the power supply, then switch on the main

power switch.

4. Enter the Service Mode.

• Push [Reset], enter "107", then hold down "Clear/Reset" for at least 3 sec.

• Touch "Fax SP"

[A]

1-225

[B]

B819R113.WMF