Ricoh PRIPORT SILVER Boletín técnico - Página 12

Navegue en línea o descargue pdf Boletín técnico para Impresora Ricoh PRIPORT SILVER. Ricoh PRIPORT SILVER 16 páginas.

Model:

PRIPORT SILVER/SILVER-V/SILVER-V2/SV2P

PRINTER DRIVER OPERATION

If the Windows test page does not print or does not look right, check the printer driver

operation using these steps:

1. Select the Details tab in the Properties menu of the printer driver.

2. Change the port connection to "File:"

3. Click the Apply button. Then select the General tab and click the Print test page button.

4. Set the file name (e.g. test.prn). Then set the disk/directory location. Save the file.

5. Click "YES" when the message pops up and asks whether the test page printed correctly.

6. Access the MS-DOS prompt or Command Prompt.

7. Check that the engine and controller are ready for printing. Then execute the following

command at the MS-DOS prompt or Command Prompt. "copy /b test.prn lpt1"

NOTE: 1) Always input "/b" after the Copy command.

2) The above example applies if the file name saved in the step 4 is

"test.prn".

3) If the controller is connected to the second PC port, replace "lpt1"

with "lpt2".

8. Input "exit". Then exit from the MS-DOS prompt or command prompt.

9. If the test page has printed correctly, change the printer driver port from "File:" back to its

previous setting.

There are no SP modes for the printer controller unit.

Technical Bulletin

No:

Date:

30-Sep-03

PAGE: 12/15

015

R-C231-