Cisco Unified 7900 Series Manual del sistema - Página 33

Navegue en línea o descargue pdf Manual del sistema para Teléfono IP Cisco Unified 7900 Series. Cisco Unified 7900 Series 36 páginas. Release notes for firmware release 9.3(1)sr2
También para Cisco Unified 7900 Series: Manual del sistema (50 páginas), Manual de soluciones (10 páginas), Notas de publicación (20 páginas), Manual del usuario (11 páginas)

Imprimir página

Cisco Unified 7900 Series Manual del sistema

Chapter 43

Cisco Unified IP Phones

Table 43-6

phones, see the

Administration Guide.

Table 43-6

Phone Configuration Checklist for SIP Protocol

Configuration Steps

Step 1

Gather the following information about the phone:

•

Model (7905, 7911, 7912, 7940, 7941, 7960, 7961, 7970,

7971)

MAC address

•

Physical location of the phone

•

Cisco Unified CallManager user to associate with the phone

•

Partition, calling search space, and location information, if

used

•

Number of lines and associated DNs to assign to the phone

Step 2

If configuring the SIP phone in a secure mode, configure the SIP

Phone Port on the Cisco Unified CallManager Configuration

window.

Step 3

If security is required, complete the SIP Security Profile

Configuration. The SIP Security Profile gets added to the SIP

phone by using the Phone Configuration window.

Step 4

Configure the SIP Profile. The SIP Profile gets added to the SIP

phone by using the Phone Configuration window.

Step 5

If you are using NTP for the timing synchronization, configure

the NTP server by using the Phone NTP Reference Configuration

window. Add the NTP server to Date/Time Group Configuration

and then assign the date/time group to the device pool. Add the

device pool to the SIP phone by using the Phone Configuration

window.

Step 6

If you want the digits to be collected before sending them to

Cisco Unified CallManager, configure a SIP Phone Dial plan.

Add the SIP Dial Rule to the SIP phone by using the Phone

Configuration window

Step 7

Add and configure the SIP phone.

OL-14153-01

lists the configuration steps for Cisco Unified IP Phones that support SIP. For third-party SIP

Third-Party SIP Phone Configuration Checklist

Phone Configuration Checklist

in the Cisco Unified CallManager

Procedures and Related Topics

Phone Search, page 43-27

Cisco Unified CallManager

Cisco Unified CallManager Administration

Guide

Phone Security Profile

Configuration, Cisco