Ricoh 35 Manual - Página 6
Navegue en línea o descargue pdf Manual para Cámara digital Ricoh 35. Ricoh 35 12 páginas.
También para Ricoh 35: Manual (13 páginas)
Imprimir página
Enelbh
(S) SPRING MOTOR WINDING KNOB
(T) FILM REWIND BUTION
(U) CARTRIDGE POSITIONING SPRING
(V) FILM PRESSURE PLATE
(W) FILM TAKE·UP CLIP
( X) TAKE·UP SPOOL
(Y) VIEWFINDER EYEPIECE
( Z) SPROCKET
(AA) FILM REWIND SHAFT
LOADING THE MERCURY BATIERY
Mercury battery is the power source of the
electric eye automatic exposure mechanism of
the camera.
Unscr~w
the mercury battery compartment
cover and put the mercury battery with
"+"
side
up in the compartment. (Fig. 1).
Then, screw
the cover flrmly closed.
The life of the mercury battery is approximately
one year under average use conditions.
The battery's life is not affected by the num-
ber of pictures taken during this period. but ra-
ther by the time which the camera itself is ex-
posed to light and the temperature at which it
is stored.
When not in use replace the camera
into
th~
carrying case or simply cover the CdS
3
English
cell (D),
or set
the
SHUTIER
SPEED RING
(F) to the FLASH
(~)
position.
Store the camera away from above normal tern·
peratures or in a cool place.
When replacing the
battery, use Mallory RM-675R. Eveready E675 or
equivalent.
LOADING THE CAMERA
1. Open the camera back by pushing BACK CO-
VER LATCH (B) to OPEN position. (Fig. 2).
2.
Pull out FILM REWIND KNOB (P). (Fig. 3).
3.
Insert the fHm cartridge into the chamber
and push FILM REWIND KNOB back so that
the slot of REWIND SHAFT (AA) engages, the
flIm cartridge. (Fig. 4).
4. Turn TAKE·UP SPOOL (X) so that FILM TAKE·
UP CLIP (W) is in the position illustrated in
(Fig. 5).
5.
Insert the fUm leader into the clip as shown
in (Fig. 6) and engage the small raised single
sprocket into a hole in the film.
6. Turn SPRING MOTOR WINDING KNOB (S) in
the direction of its arrow so that the perfora-
tions of the film leader are engaged by the
film advance. sprocket teeth.
Be certain that the sprocket holes in the film
4