Cisco Webex 840S Manual - Página 8

Navegue en línea o descargue pdf Manual para Teléfono IP Cisco Webex 840S. Cisco Webex 840S 12 páginas. Wireless phone
También para Cisco Webex 840S: Manual de consulta rápida (3 páginas), Manual (36 páginas), Manual de consulta rápida (3 páginas), Manual de consulta rápida (3 páginas)

Phone Configuration

Caution

Use only the approved USB cable for the Webex Wireless Phone 840 and 860.

Procedure

Step 1

Plug the USB cable into the bottom of the phone with the pins aligned.

Step 2

Plug the USB cable into a USB port on a computer.

Related Topics

Phone Configuration

For your phone to work, it must connect to your organization's Wi-Fi network and call control system.

Phone configuration uses one of these methods:

• Your administrator sets up the phone—You don't need to do any manual configuration. Your administrator

• You set up the phone for your Wi-Fi network and connect to the call control system—Your administrator

Once your phone is connected to the Wi-Fi network and call control system, you may want to:

• Configure Cisco Phone

• Pair your Bluetooth

See

Settings

Wi-Fi Profile Configuration

For an out of box or factory reset phone, you configure the Wi-Fi network through the startup wizard or select

Set up offline. How you configure the phone offline depends on whether the Wi-Fi network is either:

• Broadcasted

• Nonbroadcast or hidden

Phone Setup

Cisco Accessory Part Numbers

may even lock your access to the configuration menus.

gives you the information that you need to add your phone to the Wi-Fi network and call control system.

Note

If your organization's Wi-Fi network does not contain DHCP Option 150 to direct

your phone to the call control system, then you can manually point the phone to

the TFTP server for your call control system environment.

device to the phone.

for detailed directions.

app User settings, such as ringtones and automatic noise cancellation.

Phone Setup