Ricoh AP610N - Aficio B/W Laser Printer Manual complementario - Página 13

Navegue en línea o descargue pdf Manual complementario para Accesorios para impresoras Ricoh AP610N - Aficio B/W Laser Printer. Ricoh AP610N - Aficio B/W Laser Printer 38 páginas. Sap printing
También para Ricoh AP610N - Aficio B/W Laser Printer: Manual de instalación (1 páginas), Manual de servicio (20 páginas), Manual (12 páginas)

Imprimir página

Ricoh AP610N - Aficio B/W Laser Printer Manual complementario

Note

❒ The /etc/hosts file contains a list of the IP addresses and host names of all

hosts communicating on the network. Each entry is delimited with a space

or a tab, and each line is separated with a return.

❒ If you do not use NIS or DNS, you must manually enter the IP address and

host name of each workstation using the network printer in the /etc/hosts file.

❖ ❖ ❖ ❖ Adding an entry to the /etc/printcap file

The following entry is added to the /etc/printcap file, which is the configuration

for printing with the lpr command. In order to use the lpr command to print, you

need to edit the /etc/hosts file, add an entry for the network printer to the

/etc/printcap file and create a spool directory:

##PRINTTOOL3## REMOTE

np|Network Printer:|np|Network Printer:|np|Network Print-

er:|np|Network Printer:\

:rm=nphost:\

:rp=option:\

:sd=/var/spool/lpd/npd:\

:lf=/var/log/npd-errs:\

:sh:\

:mx#0:

Note

❒ The /etc/printcap file is used to register the name and attributes of a printer.

You must make an entry for the network printer in the /etc/printcap file of all

workstations using the network printer.

❒ You must make an entry for each printer option when using the same printer.

❒ Each entry is separated with colons into several fields. The syntax is to begin

each entry with a colon, followed by the entry, and then end with a colon, a

back slash, and then a return.

❒ The first line of the field is the name of the printer. You use this name when

logging on to a network printer from a workstation. You can define several

different names by separating each name with the "|" character.

❒ The second and following lines contain the printer's attributes. Attributes

are represented by two-character names referred to as capabilities. For

more information about capabilities, see the following table:

Capability

Explanation

Host name of the printer.

Optional specification.

"lp" will be assigned, if the option

is not used.

Path name of the spool directory.

Using the Installation Shell Script

Value required for the network

printer.

The host name that was registered

with the /etc/hosts file.

Select options for printing. For

more information about available

options, see p.18 "Specifying the

Device Option".

Path name of the spool directory

that is to be created.