Ricoh GR III Faq - Página 4

Navegue en línea o descargue pdf Faq para Accesorios para impresoras Ricoh GR III. Ricoh GR III 36 páginas.

Q: What is the angle of view when the crop function is set, when the wide conversion lens is attached

to the GR III, and when the tele conversion lens is attached to the GR IIIx?

A: In the case of GR III

Crop off: 75.2°

Crop 35mm: 63.3°

Crop 50mm: 46.7°

GR III + Wide conversion lens (GW-4)

Crop off: 91.5°

Crop 35mm: 78.8°(35mm film equivalent 26mm)

Crop 50mm: 59.8°(35mm film equivalent 38mm)

In the case of GR IIIx

Crop off: 56.8°

Crop 50mm: 46.7°

Crop 71mm: 33.7°

GR IIIx + Tele conversion lens (GT-2)

Crop 50mm: 32.1° (35mm film equivalent 75mm)

Crop 71mm: 22.8° (35mm film equivalent 107mm)

*When the tele conversion lens (GT-2) is attached, the camera will automatically switch to a 50mm

crop.

* All are diagonal angles.

Q: What is the shooting distance range when the tele conversion lens is attached to the GR IIIx?

A: When macro is off in Focus AF, the shooting distance range is from 0.4m to ∞ from the tip of the GT-2.

When the macro mode is on, the shooting distance range is from 23cm to 50cm from the tip of the GT-2.

*The value on the focus bar displayed when the focus is MF, It is the shooting distance from the tip of the

lens.

*When the tele conversion lens (GT-2) is attached, the camera will operate within the allowable shooting

distance when moving the focus in MF mode.

Q: Is there any function for reduce camera shake?

A: Yes, there is the built-in sensor-shift Shake Reduction system (SR) with 3-axis both of GR III and GR IIIx..

*You can set [On] or [Off] at

□

[Shooting Assist] menu.