Ricoh PJ WX4153N Manual - Página 10

Navegue en línea o descargue pdf Manual para Proyector Ricoh PJ WX4153N. Ricoh PJ WX4153N 28 páginas.
También para Ricoh PJ WX4153N: Manual de información de seguridad (28 páginas)

Imprimir página

1. Safety Information for This Machine

220–240 V, 1.8A or more, 50/60Hz

Please be sure to connect the power cord to a power source as above.

For users in Norway, this product is also designed for an IT power distribution system with phase-

to-phase voltage of 230V.

Handling the main machine

This section explains safety precautions about handling the main machine.

• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy

disconnection of the power cord in the event of an emergency.

• If the machine behaves unusually as follows, turn off the power immediately. After turning off the

power, make sure to disconnect the power cord plug from the wall outlet, and then contact your

service representative and report the problem. Continuously using the power cord can result in

fire or electric shock.

• The machine is emitting smoke

• The machine is emitting odors

• Metal objects or other foreign objects have fallen inside the machine

• Water or other fluids have fallen inside the machine

• Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could

result in electric shock.

• The following explains the warning messages on the plastic bag used in this product's

packaging:

• Do not leave the polythene materials (bags, etc.) supplied with this machine close to babies

and small children. Suffocation can result if polythene materials are brought into contact

with the mouth or nose.

• If the machine topples or a cover or other part is damaged, turn off the power immediately. After

disconnecting the power cord plug from the wall outlet, contact your service representative.

Using the machine continuously can result in fire or electric shock.

• Do not turn the main power switch off or remove the power cord while power is being supplied

to the machine. Doing so may ruin the flash memory drive or cause other damage.