Ricoh PJ X4241N Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Proyector Ricoh PJ X4241N. Ricoh PJ X4241N 24 páginas.
También para Ricoh PJ X4241N: Manual del usuario (28 páginas), Notas para los usuarios (2 páginas)

Imprimir página

• Power Source

Please be sure to connect the power cord to a power source as above.

Handling the Main Machine

This section explains safety precautions about handling the main machine.

• If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power

immediately. After turning off the power, be sure to disconnect the power cord plug from the

wall outlet. Then contact your service representative and report the problem. Do not use the

machine. Doing so could result in fire or electric shock.

• If metal objects, or water or other fluids fall inside this machine, you must turn off its power

immediately. After turning off the power, be sure to disconnect the power cord plug from the

wall outlet. Then contact your service representative and report the problem. Do not use the

machine. Doing so could result in fire or electric shock.

• Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could

result in electric shock.

• The following explains the warning messages on the plastic bag used in this product's

packaging.

• Keep the polythene materials (bags, etc.) supplied with this machine away from babies

and small children at all times. Suffocation can result if polythene materials are brought into

contact with the mouth or nose.

• If the machine topples, or if a cover or other part gets broken, you must turn off its power

immediately. After turning off the power, be sure to disconnect the power cord plug from the

wall outlet. Then contact your service representative and report the problem. Do not use the

machine. Doing so could result in fire or electric shock.

• The machine may be very hot after it is turned off, especially the vents and the lower part of the

unit where the lamp is located. Avoid touching these areas. Doing so may result in burns.

• Do not place the machine on other equipment or vice versa. Doing so may cause heat buildup

inside the machine or cause the other equipment to malfunction.

Safety Precautions to Be Followed