Epson ELPFP15 Manual de instalación - Página 5

Navegue en línea o descargue pdf Manual de instalación para Proyector Epson ELPFP15. Epson ELPFP15 24 páginas.

Introduction

Handle the power cord carefully to avoid fire or electric shock.

Incorrect handling could cause fire or electric shock. Observe the following precautions when

handling:

•

Do not handle the power plug with wet hands.

•

Do not use a power cord that is damaged or modified.

•

Do not pull the power cord with too much force when routing the cable through the setting plate.

Do not install the product in a location where it might be exposed to vibration or shock,

which could cause damage to the projector or mounting surface.

This could cause damage to the projector or mounting surface. If this product falls, it could cause

death or personal injury.

The installation work should be performed by at least two qualified service personnel. If

you need to loosen any screws while installing, be careful not to drop the mount.

If this product falls, it could cause death or personal injury.

The installation surface requires enough strength to hold the projector and this product.

Before installing, check the total mass of the projector and this product to ensure that the instal-

lation surface is strong enough to support the weight. If the wall is not strong enough, reinforce

the wall before installation.

Do not hang on the mount or hang a heavy object on it. Or do not hang a heavy object on

the mount.

If this product falls, it could cause death or personal injury.

Do not use adhesives, lubricants, or oils to install or adjust the product.

If you use adhesives to prevent the screws from loosening or things such as lubricants or oils on

the slide plate fixing part of the projector, the case may crack and cause the projector to fall,

resulting in personal injury or property damage.

Tighten all screws firmly after adjustment.

Otherwise, the projector or mount may fall and cause personal injury or property damage.

Never loosen the screws after installation.

Confirm on a regular basis that the screws have not become loose. If you find any loose screws,

tighten them firmly. Otherwise, the projector or mount may fall and cause personal injury or prop-

erty damage.

Attach the safety wire supplied to prevent the product from falling due to earthquakes or

vibrations.

Inspect the product on a regular basis to ensure there is no damage.

If any parts are damaged, stop using the setting plate immediately. If this product falls, it could

cause death or personal injury.

Do not use the projector in a location subject to combustible or explosive gas.

High temperatures within the projector may cause ignition and a fire to occur.

Only a specialist should remove or reinstall the projector, including for maintenance and

repairs.

See the projector's User's Guide for instructions on maintenance and repairs.

Warning