Epson ELPMB64 Manual de instalación - Página 23

Navegue en línea o descargue pdf Manual de instalación para Proyector Epson ELPMB64. Epson ELPMB64 32 páginas. Short throw projector wall mount

Installing the Wall mount

Assembly and Installation

Follow the work flow below to install the wall mount.

Check the position where you want to install the wall plate, and then mark that position

on the wall.

Attach the wall plate so that the center of the screen and the marked gauge line of the wall plate are

on the same line as shown in the following illustration. Allow at least 5 cm space between the top of

the image projected onto the screen and the bottom of the wall plate.

After installing, you can slide the projector horizontally 4.5 cm by using the slider on the adjustment

unit. See "Turning on the projector and checking the screen"

a: Center of the wall plate

b: Center of the screen

Position the wall plate over the marks you made in step 1, and then mark the points where

the wall plate will be secured as shown in the following illustration.

Insert the anchors into at least three points. If you insert at four points, use the four point As or four

point Bs as shown below.

For 3 points

p.27

for more details.

For 4 points