ActronAir LM7-2W Manual de instrucciones de instalación - Página 6

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Controlador ActronAir LM7-2W. ActronAir LM7-2W 8 páginas. Wall controller

Imprimir página
Installation Guide

05. Enabling / Disabling Zones and Assigning Sensors

NOTE
Check that the controller is turned OFF.
1.
Press and hold the "
2. Press the "
" Button repeatedly until "2-1" appears on the display screen.
NOTE
Zone 1 and 2 are always enabled and cannot be disabled.
3. Press the relevant zone button and the display will change to show the number of zones enabled.
For example: "2-1" = 2 zones enabled
"3-1" = 3 zones enabled
4. Press the "
For example: "2-1" = 2 zones enabled, sensor 1 assigned to zone 2
"3-2" = 3 zones enabled, sensor 2 assigned to zone 3
Select relevant zone button and follow step 4 to assign sensors.
5. Press the "
" Button until the Main Screen appears.
NOTE
Before returning to the Main Screen, ensure that the display screen is showing the correct number of zones that are
required to be activated.
For example: "8-1" upon exit = Zone 1 to Zone 8 are enabled
"5-1" upon exit = Zone 1 to Zone 5 are enabled
"4-1" upon exit = Zone 1 to Zone 4 are enabled
06. Enabling / Disabling Last Zone (Safety Feature)
1.
Press "
" Button to turn off air conditioner.
2. Press and hold the Zone 1 Button, press and release the "
will show "1on", signaling that 1 zone must remain ON (Factory Default Setting).
3. Press the
"
application).
4. Press the "
" Button
5. Repeat steps 1-4 to go back to Factory Default Setting.
06
" Button, press and release the "TIMER" Button and then release the "
" or "
" Button and select either Sensor 1 or 2 to assign sensors.
"
Button to turn off all zones.
to return to Main Screen.
LM7-LM24 Control Interface Insert
Doc. No. 9590-3025 Ver. 2 220907
LM7-LM24 Control Interface
" Button and then release Zone 1 Button. Display screen
Display screen will show "1oF" (Suits homes with large common zones
" Button.