Cisco 1100 Series Instalación y actualización - Página 13
Navegue en línea o descargue pdf Instalación y actualización para Enrutador de red Cisco 1100 Series. Cisco 1100 Series 15 páginas. Terminal gateway
También para Cisco 1100 Series: Manual (12 páginas), Manual de instalación del hardware (44 páginas)
Imprimir página
Installing and Upgrading Internal Modules and FRUs
Installing SFPs
Removing SFP Modules
Follow these steps to remove an SFP from the router:
Step 1
Read the Safety Warnings section and disconnect the power supply before you perform any module replacement.
Step 2
Disconnect all cables from the SFP.
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or
Warning
view directly with optical instruments. Statement 1051
The latching mechanism used on many SFPs locks the SFP into place when cables are connected. Do not
Caution
pull on the cabling in an attempt to remove the SFP.
Step 3
Disconnect the SFP latch.
SFP modules use various latch designs to secure the module in the SFP port. Latch designs are not linked to
Note
SFP model or technology type. For information on the SFP technology type and model, see the label on the side
of the SFP.
Use a pen, screwdriver, or other small straight tool to gently release a bale-clasp handle if you cannot reach it
Tip
with your fingers.
Step 4
Grasp the SFP on both sides and remove it from the router.
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
Installing and Removing SFP Modules
13