Epson EMP-1710 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Proyector Epson EMP-1710. Epson EMP-1710 25 páginas. Esc/vp21 command user's guide for business projectors
También para Epson EMP-1710: Especificaciones (1 páginas), Manual del usuario (25 páginas), Especificaciones (4 páginas), Manual de inicio rápido (16 páginas), Manual del usuario (28 páginas), Manual del usuario (28 páginas)

ESC/VP21 Command User's Guide for Business Projectors

5. Command transmission timing

5.1. Standby state

1). For all mode with the standby configuration of "network on"

The first command can be sent anytime and the subsequent commands should be sent after receiving a colon from the

projector.

2). Other than 1)

PWR ON can be sent any time.

5.2. Power on state

A command should be sent after receiving the colon of the previous command from the projector. The following is an

exception. When the PWR OFF command is sent to 7800/7850/8300/9300 with the standby configuration of "network off",

the subsequent command should be sent 10 seconds after the colon is received.

In case that you can not wait for the colon and send a command after receiving it, instead send a command after the

execution time listed in the following table.