Epson EMP-503 - SVGA LCD Projector Configuración rápida - Página 2
Navegue en línea o descargue pdf Configuración rápida para Proyector Epson EMP-503 - SVGA LCD Projector. Epson EMP-503 - SVGA LCD Projector 2 páginas. Epson powerlite 503c: quick start
También para Epson EMP-503 - SVGA LCD Projector: Especificaciones (1 páginas), Manual de consulta rápida (17 páginas)
Imprimir página
Adjust the image
1
Rotate the focus ring to sharpen the image.
If you see a blank screen
Note:
see the instructions in the box below.
2
Rotate the lens ring to reduce or enlarge the image.
(You can also move the projector closer to or farther
from the screen.)
If you see a blank screen or the No signal message
after turning on your laptop, check the following:
Make sure the
power light is green and
not flashing and the lens cover is off.
Try turning off the laptop and restarting it.
If you've connected more than one computer and/or video source,
you may need to press the Source button on top of the projector.
(Allow a few seconds for the projector to sync up after pressing it.)
If you're using a Windows laptop:
Hold down the Fn button and press the function key that lets you
display on an external monitor. It may have an icon such as
or it may be labelled CRT/LCD. Allow a few seconds for the projector
to sync up after pressing it.
On most systems, the
screen and the projector, or display on both at the same time.
You might need to use the Display utility in the Control Panel
to enable both the LCD screen and external monitor port.
Check your laptop's manual or online help for details.
EPSON PowerLite 503c/713c
EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Copyright © 2001 by Epson America, Inc.
lens ring
focus ring
after focusing,
No signal
If You See a Blank Screen
No signal
key lets you toggle between the LCD
EPSON
3
To raise the image, pull up the blue foot release levers and lift
the front of the projector. Once the image is positioned where
you want it, release the levers to lock the feet in position.
4
If your image looks like
off to one side of the screen, at an angle. Move it directly in
front of the center of the screen, facing the screen squarely.
5
If your image looks like
the Keystone button to correct the shape of the image.
If you're using a Macintosh
1. From the Apple menu, select Control Panels, then click Monitors
or Monitors and Sound.
2. Click the Arrange icon.
click here
3. Drag one monitor icon on top of the other. This lets you display
on the projector screen as well as the LCD screen.
,
If the Arrange option isn't available, you may need to select one of the
Simulscan resolution settings:
4. Click the Monitor icon.
click here
5. Select a Simulscan resolution as shown. (Allow a few seconds for
the projector to sync up after making the selection.)
PowerLite
503c/713c
®
®
or
, you've placed the projector
or
, press the + or – side of
:
®
drag one monitor icon
on top of the other
select a Simulscan
resolution
CPD-12797