Cisco 1805 Instalación y sustitución - Página 2

Navegue en línea o descargue pdf Instalación y sustitución para Enrutador de red Cisco 1805. Cisco 1805 4 páginas. Integrated services router
También para Cisco 1805: Manual de instalación del hardware (12 páginas), Manual de inicio rápido (4 páginas), Ficha de datos (10 páginas)

Removing a CompactFlash Memory Card

To remove a CompactFlash memory card from an external slot, follow these steps:

If the CF LED is on or blinking, do not remove the CompactFlash memory card. The router could crash,

Caution

or the flash memory contents could be corrupted.

Press the ejector button next to the CompactFlash memory card. The ejector button moves outward so

Step 1

that it projects from the panel.

Press the ejector button again to unseat the card.

Step 2

Carefully pull the card out of the slot.

Step 3

Place the removed CompactFlash memory card on an antistatic surface or in a static shielding bag.

Step 4

Push the ejector button in until it clicks.

Step 5

To prevent damage to the ejector mechanism, the ejector button must remain fully seated when it is not

Caution

being used to eject a CompactFlash memory card.

To install a CompactFlash memory card, follow these steps:

Make sure that the ejector button is fully seated so that it does not project from the panel.

Step 1

Note

With the label facing up, insert the connector end of the CompactFlash memory card into the slot until

Step 2

the card is seated in the connector. The card is keyed so that it cannot be inserted incorrectly.

Note

To prevent damage to the ejector mechanism, the ejector button must remain fully seated when not being

Caution

used to eject a CompactFlash memory card.

Cisco 1805 DOCSIS Cable Router Hardware Installation Guide

9-2

Chapter 9

Installing and Replacing CompactFlash Memory Cards on Cisco 1805 DOCSIS Cable Router

If the ejector button projects from the panel, push it in until it clicks.

If the ejector button projects from the panel after you insert the CompactFlash memory card,

remove the card, press the ejector button until it clicks, and reinsert the card.

OL-14661-01