Cisco 1841 - 1841 Integrated Services Router Manual de inicio rápido - Página 10

Navegue en línea o descargue pdf Manual de inicio rápido para Enrutador de red Cisco 1841 - 1841 Integrated Services Router. Cisco 1841 - 1841 Integrated Services Router 28 páginas. Integrated services router (modular)

Imprimir página

Warning

There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or

equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's

instructions. Statement 1015

Installing the Router

Note

Cisco 1800 series routers are normally ordered with modules and interface cards. Before you remove or install any

modules or interface cards, refer to the documents that accompany those items or to the online Cisco 1800 series

hardware installation documentation at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm

You can set any Cisco 1800 series router on a desktop or mount it on the wall. See the applicable instructions in the following

sections:

• Wall-Mounting the Router, page 10

• Installing the Router on a Desktop, page 12

Caution

To prevent damage to the chassis, never attempt to lift or tilt the chassis by the plastic panel on the front. Always

hold the chassis by the metal body.

Wall-Mounting the Router

Warning

This unit is intended to be mounted on a wall. Please read the wall mounting instructions carefully before

beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a

hazardous situation to people and damage to the system. Statement 248

The Cisco 1841 router can be wall-mounted by using two No. 6, 3/4-inch screws and the mounting features on the bottom of

the router. We recommend using pan-head or round-head screws (not included).

The wall-mounting features on the router are shown in Figure 1.