Cisco 2500 Series Manual de configuración - Página 12

Navegue en línea o descargue pdf Manual de configuración para Enrutador de red Cisco 2500 Series. Cisco 2500 Series 50 páginas. Wireless controller
También para Cisco 2500 Series: Manual de instalación (12 páginas), Manual de configuración (19 páginas), Manual de implantación (23 páginas), Manual de introducción (47 páginas)

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

In the navigation pane, click Summary. The heading labeled Software Version shows the

current software version.

Download the appropriate software for your model of controller from the Cisco website.

Set up a Trivial File Transfer Protocol (TFTP) server running on a PC to download the

file to the controller.

From the main menu, click Commands.

In the navigation pane, click Download File.

Fill in the download parameters:

For File Type, select Code.

b For TFTP Server, type in the IP Address of the TFTP server.

Add the File Path (this is the path in the TFTP server's root directory and not the

system path where the TFTP server is located) and File Name of the firmware file to

download.

Note

The example simply uses the /designator for the root TFTP directory.

Point the TFTP server to the code.

Click Download and allow a few minutes for the download to complete.

Reboot the Controller.

Controller Setup

The initial setup of the controller is shown below.

Note: Example only

The setup instructions outlined in this document are for the configuration shown in the

diagram only. Your configuration may differ, and the appropriate adjustments must be

made.

721-1001-000-AH.docx

December 2016